Solution to the problem of grass entanglement at the feed port of the grass cutter

When we are using the grass cutter, due to excessive feeding or other reasons, the grass cutter does not discharge, that is, the grass entanglement and grass blocking are generated inside. We should cut off the power in time, stop the machine, open the working cabin, clean up the excess grass entanglement and blocked grass in the working cabin, and then close our cabin, re-power on and work again. You can flexibly adjust the height of the tail plate of the discharge, and then let the material blow farther or closer. It can be solved. If it is still entangled, then we have to consider the adjustment plate in the cabin. The gap between the adjustment plate and the sprocket must be adjusted well, and there should be no gaps. If there are gaps, it is easy for grass to enter and bite the grass and it is easy to break the chain. There is a feeding plate at the feeding port. If the feeding plate is deformed, it should be replaced or processed in time. Failure to deal with it will cause grass entanglement on the upper shaft. The most important thing is the kneading head. The kneading head is worn and the gap between it and the feeding plate becomes larger, and the situation of grass entanglement will occur. Another possibility is that if the blade is worn too much, you need to replace the blade to solve the problem of grass entanglement.