Feed Grass Chopper

The Feed Grass Chopper is suitable for various dry materials, wet materials, grains, etc., and is widely used in the feeding of pigs, rabbits, sheep, geese, chickens, ducks, etc.

The working principle of the Feed Grass Chopper:

Manually put the materials on the conveyor belt, and the conveyor belt automatically sends the materials in. The gear rollers rotating at high speed drive the materials into the cutting structure. The blades rotating at high speed, together with the hammer pieces, cut, crush and grind the materials under the airflow rotating at high speed. The relative movement of the hammer pieces and the tooth plate kneads the materials into a scattered and filamentous state. After being thrown to the kneading head by the fan, the materials are kneaded again and then thrown out of the machine body. The length of the materials can be adjusted according to the gear shifting and speed changing.

After the Feed Grass Chopper has been used for a period of time, some aspects need to be paid attention to in order to make it last longer.

Precautions before using the Feed Grass Chopper:

Read the instruction manual before starting the machine, and adjust and maintain it according to the regulations. The operator must master the structure and functional requirements of this machine.

The supporting power should meet the requirements, and the spindle speed should not be increased privately.

Before starting the machine, check whether the running direction is the same as the cutting direction. Otherwise, starting the machine is prohibited.

Hard objects such as metals and stones must not be mixed into the materials to be cut, otherwise the machine will be damaged.

After the machine has been running for a few hours, observe whether all components are loose, and it is necessary to regularly add grease to the bearings.

Precautions for the Feed Grass Chopper:

According to the requirements of the instruction manual, grease should be regularly added to the gears. Dry grinding is strictly prohibited. Add oil once for each cutting.

When replacing the fastening bolts of the movable and fixed blades, high-strength bolts must be used, and ordinary fasteners should not be used instead.

The movable and fixed blades should be kept sharp.

When the grass cutting, crushing and kneading machine is out of use, wipe off the surface dust and dirt. If it is placed outdoors, pay attention to preventing rain and moisture to avoid rusting.

After the grass cutting, crushing and kneading machine has been used for a period of time, pay attention to observe whether the tension of the conveyor belt is loose, and the bolts of the conveyor belt can be adjusted to tighten and fix it.

Hot Tags: China,Custom,Chinese , Feed Grass Chopper , manufacturers,suppliers,factory, price